What is the fastest way to pressure wash a driveway

  1. It sounds obvious, but it has to be said: homeowners should clear the area of ​​children’s toys, vehicles, and other things that might interfere with pressure washing.
  2. Prepare your cleaner by attaching the garden hose and nozzle at 25 degrees. Now turn it on and give your driveway a go to remove debris like rocks, grass, and small leaves or tree branches.
  3. Now it’s time to apply the detergent. Be sure to read your machine’s manual to find out which driveway cleaners and degreasers are recommended to use with your particular washer. Also be sure to attach the low pressure soap nozzle to your sprayer at this point. The soaping nozzle is designed to soak the driveway rather than hose it down – this is step 5.
  4. Now let the cleaning solution work its magic on the driveway for about 5 minutes before proceeding with the appropriate pressure washing.
  5. Now that the detergent has broken down driveway stains and stubborn grime, mildew and other grime, it’s ready to get rid of it all. A pressure washer surface cleaner attachment is the recommended method. A surface cleaning attachment will complete the cleaning faster and better because it disperses the water over a larger area – not only reducing the risk of damage to the concrete from the high pressure, but also pulsing the flow to ” “rip” dirt and grime from the surface more easily. Depending on the size and material (plastic or stainless steel), a surface cleaner can cost between $20 and $2,000.
  6. A rotating nozzle does the same thing as water flow as a surface cleaner. It pulsates/rotates the flow of water to better push and loosen dirt and grime from the surface. Use one to remove very stubborn stains and dirty areas.
  7. The driveway should now be clean. It is ready for the final rinse to remove the detergent. Attach the 25 degree nozzle to your spray wand and rinse thoroughly.

Purge the hose

You must carefully read the user manual of your pressure washer. Not all pressure washers are on as soon as they are connected to the hoses. It’s always a good idea to press the button for a few seconds before you get a good steady flow. This releases the air, preparing the system for a more powerful blast. This is the way to go if you want a better idea of ​​pressure washer maintenance.

Using the correct nozzle is essential if you choose to use a pressure washer effectively. The most effective punches are usually delivered from the smallest angles. If you are cleaning around the driveway, a 25 degree nozzle will suffice. If you want to remove concrete with detergent, a 65 or 45 degree nozzle will suffice. Before using the machine, always make sure that the tip of the nozzle is completely fixed.

What do you need to pressure wash a driveway?

Before discussing how to pressure wash a concrete driveway or pressure wash a brick driveway, you should gather all the supplies needed for this cleaning method. Having the right equipment and the right products is crucial if you want to properly pressure wash a driveway. Here’s what you need:

You need a high quality pressure washer that can deliver around 3,000 pounds per square inch (PSI). The higher the PSI, the faster and more efficiently you can clean your driveway.

Aisle size

The typical price to pressure wash an aisle ranges from $0.20 to $0.40 per square foot. The larger the driveway, the more it will cost to clean it. Some pressure washing companies will have base charges for specific sizes of inlets and charge per square foot above that size. If you have a small area to clean, keep in mind that some companies charge minimum fees for pressure washing services. Many professionals will come to your home to determine the size of the project before offering you an estimate.

The process of pressure washing a driveway depends on the surface material. Each driveway type has its own cleaning process and considerations. Price ranges and cleaning details are covered in a section below.

Homemade Concrete Degreaser Recipe

  • Vinegar
  • Borax
  • Baking soda
  • Hot water

Sprinkle the stain directly with baking soda and let sit for about five minutes. Slowly pour white vinegar directly over the baking soda and allow the ingredients to fizz for several minutes. Then apply Borax to the wet surface.

Leave a Comment